Page 55 - TRAINING MODULE_BTM

BUMI TUNGGAL MAJU SDN BHD TRAINING MODULE

• Clean sinks using a disinfectant cleaner and abrasive sponge, first makingsure they safe
for surfaces including chrome. Leave disinfectant on surfacesaccording to the
manufacturer’s dwell-time directions.
• Clean mirrors with glass cleaner and soft, clean cloths, or use an applicatorand squeegee.
Microfiber cloths enable cleaning glass and mirrors withwater only and without
chemicals.

• Clean and disinfect toilets and/or urinals. Remove urinal screens. Using abowl swab,
force the water level down in urinals and toilet bowls by repeatedlypushing the swab
down the throat or flush path. Apply bowl cleanerto the exposed interior surfaces of the
bowls and urinals, especially underthe rim. Allow time for the chemical to work, while
cleaning partitions andshowers (several to 10 minutes, based on the manufacturer’s
directions).
• Remove graffiti from walls and stall partitions. Clean stall partitions and wallsas needed
with disinfectant cleaner.
• Clean both sides of entrance/exit doors with a disinfectant cleaner, payingspecial
attention to hand contact areas.
• Return to scrub the inside of the bowls and urinals with a bowl swab orbrush. Use a brush
or abrasive sponge for difficult soils. Clean the exterior ofthe bowls and urinals with
disinfectant cleaner. Clean both sides of the toiletseat. Clean the walls around the bowls
or urinals with disinfectant cleaner.
• Flush bowls and urinals. Polish all chrome surfaces with a dry cloth aftercleaning with a
disinfectant cleaner.
• Scrub the floor with a disinfectant cleaner using a wet mop, bucket, andwringer. If
needed, scrub the floor grout with a tile and grout brush. Rinsewith clear water. Squeegee
or vacuum up water, if necessary.
• Treat sink, shower, or floor drains with drain maintainer, if necessary.
• Inspect the work. If satisfactory, allow the floor to dry and re-open therestroom. Return
the cart to the supply area and restock.

53